| Thread | Last Post | Replies |
|
| geophysics/math Ph.D. proposal, comments desired. | 27 Apr 2004 16:24 GMT | 1 |
I'm currently editing my geophysics/applied math Ph.D. proposal and would like comments back, preferably to my campus e-mail address n06drd@mun.ca (where that is zero and not Oh) on its potential originality and on any literature review references
|
| Room noise cancellation | 18 Apr 2004 21:07 GMT | 1 |
Is anybody aware of a device that will cancel noise in a room. I know about the headphones, btw. TIA, Dennis
|
| Sound Insulation - Screeds -v- Platform/Batten floating layers | 15 Apr 2004 07:40 GMT | 7 |
Does anyone know why a screed could not substitute for a platform/batten floating layer in a separating floor system? In the main part of the Approved Document E of the UK Building Regulations the two are interchangable; however in the robust standard details, Steel Floor 2 has
|
| Random Noise Generator | 13 Apr 2004 14:52 GMT | 4 |
Dear group: I am looking for a random noise generator circuit to drive an architectural acoustics noise source (50Hz-8 kHz), the ususal "pink noise" type. I don't need an amplifier, just a crcuit diagram for a
|
| Recording room designs--please evaluate | 12 Apr 2004 20:36 GMT | 1 |
Hey everybody, I'm a graduate student doing research on recording studio design and acoustics. I have developed two design alternatives for a musical recording room, and I would very much appreciate if all you acousticians, producers, engineers, and other experts out there would ...
|
| Looking for resources and references for acoustic consultant for Ohio drum shop job. | 09 Apr 2004 02:12 GMT | 2 |
I am in need of professional advice concerning treatment and reconstruction to reduce the transference of sound (drums) to my neighbors on either side and above in an old building in Cuyahoga Falls Ohio. I would appreciate any help steering me toward the right person(s) to consult ...
|
| rt60 calculation | 02 Apr 2004 09:03 GMT | 2 |
I'm doing an RT60 calculation of a room at different frequencies. I'm using 1/3 octave noise for frequencies smaller than 512 Hz and octave noise for highest frequencies. I've recorded all the reverbs and now I'm feeding matlab for the analysys. I've some question:
|