Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
Biology
BiologyBotanyMicrobiologyEntomologyEvolutionPaleontology
Chemistry
General ChemistryAnalytical ChemistryElectrochemistryOrganic Synthesis
Earth Science
GeologyMineralogyOceanographyMeteorologyEarthquakes
Physics
General PhysicsResearchRelativityParticle PhysicsElectromagnetismFusionOpticsAcousticsNew Theories

Natural Science Forum / Physics / Acoustics / April 2005



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
low frequency street sweeper how do I mitigate the sound?30 Apr 2005 17:22 GMT6
Skip to the end for the question if you don't feel like reading the
whole set-up.
I live in an urban downtown district, and the builder had the bad idea
of putting the bedroom at the front of the building.  I live on the
Need a simple test of resonator absorbers29 Apr 2005 02:06 GMT11
I am starting to get interested in resonator type absorbers for an
application I have in mind where porous bulk absorption is not an
option. I went down to the chemical stock room and got a few glass
Erlenmeyer flasks - a 5000 cc, a 500 cc, etc. Round globes, short
Pope Ben1622 Apr 2005 11:12 GMT2
I have chosen a chat room handle for him;
BEN16.
Ang.
T60 in a big space21 Apr 2005 16:35 GMT4
Friends:
I want to ask if the t60 depends on the position in a big space,
specifically a basquet stadium. In this order is better to take T60
measurements in various points or everyone give the same result?. a
Is There Even A Monograph?20 Apr 2005 08:08 GMT4
Does anyone know of a good book or article on Tonpilz transducer design?
If I have a Terfenol-D rod 1.5" long, it will probably have a resonant
frequency somewhere around 60 kHz but I want to drop it down to 15-18
kHz and I'd like some way to know how much mass to attach to it ...
Making It Loud?18 Apr 2005 03:28 GMT96
Hi, All;
I want to do some experiments with magnetostrictive transducers,
particularly rings. I have the idea to fire a jolt of high voltage from
an electronic flash unit into a  ring of Terfenol- D  whose resonant
Glazing in excess of 50dB RW16 Apr 2005 07:22 GMT3
I have been asked to look at the possibilities of creating glazing
configuration to provide
50-63dB Rw. My own view is that these levels of reduction are probably
unachievable
resonance frequency of perforated panel12 Apr 2005 17:06 GMT3
Hi all, my name is nanggroe, I am a research student in Acoustics Lab.
Univ. Technology Malaysia.I am a new comer here.. nice to join with you
all.
I am studying about perforated panel sound absortion coefficien using
Noise Due to Falling Water11 Apr 2005 03:00 GMT2
I have had a request to predict the noise from a waterfall or a
fountain in a condo development.
The water is flows from a small pool down an incline about 10 - 15
degrees from vertical and the drop is about 2 metres to another pool.
Pope05 Apr 2005 19:44 GMT1
A moment of silence, all.
Pope John Paul just died.
Angelo Campanella
Audio recordings "leaching" onto adjacent tape sides?03 Apr 2005 06:32 GMT6
I'm aware that, in domestic compact cassettes, if you listen to a
blank, or silent area on one side of a tape, you can hear a faint,
reversed "echo" from the other side. I believe that this is due to the
audio tape being very tightly wound and the magnetic impressions being
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.